Pivot to spindle: 223mm Effective length: 240.7mm Effective Mass: 10.6g Overhang: 17.7mm Offset angle: 22.85 degrees Average RMS distortion: .36%

Pivot to spindle: 223mm Effective length: 240.7mm Effective Mass: 10.2g Overhang: 17.7mm Offset angle: 22.85 degrees Average RMS distortion: .36%

Pivot to spindle distance: 258mm Effective length: 273.42mm Effective mass: 11g Overhang: 15.42mm Offset angle: 19.98 degrees Average RMS distortion: .311%

Pivot to spindle: 258mm Effective length: 273.4mm Effective mass: 9g Overhang: 15.4mm Offset angle: 19.98 degrees Average RMS distortion: 0.311%

Pivot to spindle: 300 mm Effective length: 313.0 mm Effective mass: 10.5g. Overhang: 13mm Offset angle: 17.37 degrees Average RMS distortion: 0.267%

Pivot to spindle: 300 mm Effective length: 313.0 mm Effective mass: 10.5g. Overhang: 13mm Offset angle: 17.37 degrees Average RMS distortion: 0.267%

Pivot to spindle: 300 mm Effective length: 313.0 mm Effective mass: 12.5g. Overhang: 13mm Offset angle: 17.37 degrees Average RMS distortion: 0.267%

This base is a uni-pivot type based designed to work flawlessly with our JMW-10 uni-pivot arms. It features a large knurled VTA/SRA tower with a smooth precise feel makes it easy to set VTA/SRA during play. The base allows changing of arm-tubes in seconds instead of hours for those with multiple cartridges. In addition, a secondary mounting has been placed between the arm rest and the arm lift to greatly improve the arm's rigidity literally making these the only arms that can do VTA adjustments while listening and then be locked as rigid as a solid mounted arm.

Replacement white hose clamp for all VPI record cleaner drain tubes is a must for proper operation! Is your VPI record cleaner drain tube clamp worn or broken? If so this replacement clamp is just what you need. It is extremely important that this clamp be installed and functioning properly when cleaning records. If this clamp is missing or working improperly while cleaning, fluid can be sucked from the waste fluid compartment and be spread all over the inside of your cleaning machine.

Specifically formulated record cleaning fluid designed to be used with VPI record cleaning machines, all other cleaning machines, and hand cleaners with enough fluid to clean 40-50 records.

This concentrate is great for shipping overseas! Our own concentrated record cleaning machine fluid. This 1oz bottle makes one gallon of fluid when mixed with your own gallon of distilled water. Note: If solution beads upon application simply add 10oz of alcohol into one gallon of fluid.

Replacement brush Assembly for use with your HW 17 series or HW-27.

Replacement vacuum pickup tube for any VPI record cleaning machine. We recommend buying two so you always have a spare!

This will hold your vacuum tube in place. The 16.5 and cyclone have their own versions of this holder.

The full set needed to clean your records. This is using the 12" tube for cleaning.

This tube is a sturdier version of our standard vacuum tubes.

Replacement record cleaning brush for the VPI 16.5, 17 & 27 Typhoon record cleaning machines for 33 1/3rpm or 45rpm 12" Vinyl.

This brush is used with the HW 16.5 and MW-1 as well as previously made VPI cleaning machines. The main purpose of the cleaning brush is to brush the dirt and debris off of your records.

Essentially a clamp for 7" records, the VPI 7" Spindle Adapter threads over the spindle of all VPI record -cleaning machines and screws down to firmly hold 45RPM discs in place while cleaning.

The self-stick VPI Cork Mat is made to replace the mat on the VPI HW-16.5 record-cleaning machine but can also be utilized as a fine replacement mat on many turntable platters.

Solid Delrin Deluxe One Piece Record Clamp Disc clamping is known to reduce the affects of external vibration from acting upon the stylus. This action improves minute details and overall sound quality. One piece deluxe, adjustable record clamp. By using this record clamp, you can help reduce (and in some cases eliminate) record warpage and you create a much tighter seal between the record and your turntables platter. Works on VPI's with threaded spindle.

VPI newest record clamp makes several key improvements over the previous generation of clamps. First, the adjustable knob and upper half of the clamp is machined from solid stainless steel. By using solid stainless steel, the clamp adds even more mass and mechanical damping to the table. Since the stainless steel knob is more dense this translates to even better warp reduction when playing records. Works on VPI's with threaded spindle.

Stainless Steel Record Center Weight VPI Stainless Steel Record Center Weight will work with all VPI turntable models and most other turntable brands as well. Their turntables works best in conjunction with the VPI Stainless Steel Outer Periphery Ring Clamp, which provides vacuum-like hold down without the problems inherent in a vacuum system, for maximum stability of record playback!

The Scout motor housing has become a staple in our product line. It's design has been used on the original Scout, Scout 2, current model of the Scout, and the newly released Scout Jr. The motor is 600 RPM (500 RPM overseas) with a standard pulley to accommodate an 11.5 inch platter. Pulley for 12 inch platter is also available upon request when ordering from your local dealer.

The Prime motor housing is the standard motor pod for the Prime turntable and has also turned into a staple DIY item in the industry. The motor is a 300 RPM (500 RPM overseas) with a standard pulley to accommodate a 12 inch platter.

The Signature Motor housing is made of stainless steel. The motor is a 300 RPM (500 RPM overseas)

1 oz. plastic bottle of bearing lubricant for VPI Turntables. You should re-lube your turntable bearing at least once a year to decrease wear. It also helps with your speed regulation.

This device is used to lower and raise your JMW arm. It is easily replaceable by loosening the set screw located on the side of your JMW armbase.

VPI Stroboscope Speed Control Disc accurately checks your turntable speed! With its large, easy-to-read strobe lines and low price, this is a must have for all vinyl lovers!

VPI Crosscheck Turntable Level is an effective, easy to use level, perfect for turntables. The Crosscheck Level allows two axis to be checked simultaneously, making leveling a quick and simple task. The Crosscheck Level's small form factor allows quick measurements to be taken anywhere; on the platter, on the plinth, even on the shelf itself.

This is VPI JMW - XLR Junction box. It can also be ordered with Reference wiring.

This kit has everything you need to set up your cartridge. It comes with (two keys),various sized screws, washers, and an azimuth rod.

This finger lift can be used to safely move your tonearm on and off of the record.

This digital gauge is VPI most accurate gauge that calculates tracking force. It is simple to use and mimics the height of where a record would sit on the platter.

The different weight sizes make adjustment easier pending upon the matched cartridges (recommend weights and pairings will be posted in the near future.)

VPI new JMW phono cable is a soft design that rejects any feedback into the junction box of the tonearm. The internal wire used in creating the cable is identical to the wire used internally in the JMW tonearm assuring proper sonic compatibility and transfer loss resulting in optimum sound quality. Hi quality gold plated connectors are used for the RCA termination and the cables are finished in an attractive black mesh sleeve.

The JMW Alignment Jig is a simple to use, accurate alignment jig for setting cartridge measurements. The JMW Alignment Jig addresses the three most important factors of alignment: Proper Offset, Tracking and Overhang.

VPI Stainless Steel Outer Periphery Ring Clamp from VPI! First introduced on the HR-X, the Outer Periphery Ring Clamp centers on the platter, not the record, to provide vacuum-like hold down without the problems inherent in a vacuum system. The VPI Stainless Steel Outer Periphery Ring Clamp is more effective than any other clamp!